10 Best Heated Motorcycle Grips in 2026

Nine heat settings let you dial in exactly the warmth you need without cycling through too many or too few options. The intelligent memory means once you find your favorite level, the grips recall it next time you ride, so you’re not fiddling with buttons every time you start the engine. That attention to convenience, paired with a weather-proof design that holds up against road spray and rain, makes these a strong fit for commuters and touring riders who want consistent comfort mile after mile.

The trade-off is that these grips are built specifically for 22mm handlebars, common on adventure bikes and many modern motorcycles, but not universal. If your bike uses a different bar diameter, you’ll need to look elsewhere. For anyone with 22mm bars who values fine-tuned heat and set-and-forget ease, this is the pick that gets the details right.

The sealed-for-life welded controller case on the Oxford OF690Z Heaterz Premium Adventure Heated Grips is the feature that sets it apart for riders who face rain, mud, or trail spray. That welded construction keeps moisture and grit out of the electronics, so you get reliable heat without worrying about a short on a wet ride. At under 4 amps with zero back drain current, it’s gentle on your bike’s charging system too. This is the pick for adventure riders who ride in all weather and want a grip that won’t quit when the forecast turns nasty.

At 1.3 pounds, these grips are noticeably heavier than the Koso Apollo Heated Grips at 1.1 pounds. That extra heft can be felt on a lightweight dual-sport where every ounce counts. If you prioritize absolute durability over weather protection, the Koso Apollo is a lighter alternative. But for riders who regularly tackle wet crossings or ride through the off-season, the Oxford’s sealed controller is the smarter bet.

A dedicated thumb warmer sets these grips apart. While most heated grips focus only on your palms, this model delivers targeted heat to your thumb area, which often gets left out in the cold. The 3-level smart control keeps your chosen temperature steady, so you don’t have to fiddle with settings mid-ride. With a lock-on design and plug-and-play wiring, installation takes minutes and works on standard 7/8″ handlebars from brands like Harley and Yamaha to most ATVs and UTVs.

These grips are built for 12V systems only, so they won’t work on battery-powered bikes or vehicles without a charging system. The one-piece rubber construction resists rain and dust, but if you ride a motorcycle with 1″ handlebars, you’ll need to look for grips designed for that size. For riders who want full hand warmth including their thumbs, this Gohantee pair delivers where others leave you cold.

The integrated thumb switch is the standout feature here, letting you change settings without lifting your hands off the handlebar. That means safer on-road adjustments, especially in cold weather when every second of attention matters. Koso designed these grips to fit both 7/8-inch and 1-inch handlebars, so they work with a wide range of motorcycles without adapters. For riders who value convenience and safety over extra bells and whistles, this is a thoughtful, streamlined option.

The Koso Apollo Heated Grips weigh just 1.1 pounds and measure only an inch in each dimension, so they fit easily into a small storage compartment or glove box. Compared to the Oxford Heaterz Premium Adventure, which has a longer grip surface, the Apollo keeps things compact. The integrated thumb switch lets you change settings without taking your hands off the handlebar, which reviewers say makes for a safer ride.

The five-level temperature controller lets you adjust the grip temperature in steps, so you can set it to match the conditions. The heating structure is described as delivering heat faster than previous designs, which means less waiting for warmth to come through. The rubber material is selected to resist outdoor environments, helping the grips hold up in varied weather, and the open-end design adds a clean look to the handlebars.

These grips are designed for 7/8 inch handlebars, so check your bike’s diameter before buying. They require a 12V DC electrical system, which is standard on most modern motorcycles. The five-level temperature controller lets you pick exactly how warm you want them, and the heating structure is engineered to deliver heat faster than earlier designs. The BikeMaster focuses on quick heating and precise adjustment rather than rugged touring features, unlike the heavier Oxford Heaterz Premium Adventure.

Five temperature settings range from a gentle glow to full-blast warmth for freezing commutes. The energy-saving thermostat automatically manages power draw, so your battery still has enough juice to start the bike after hours of riding in subzero conditions. That kind of precise control and battery protection makes this a smart fit for riders who want reliable winter warmth without breaking the budget.

The open-end grip design is intended to reduce hand fatigue and absorb road vibration, which can be a plus for long rides. However, if you ride in extreme cold all day, some riders may prefer a grip that offers more coverage. For daily commutes and moderate touring, the Keenso delivers five levels of adjustable comfort at a budget-friendly value that’s hard to match.

Ten heat settings give you fine-grained control over warmth, so you can dial in exactly the level you need, from a gentle take-the-chill-off on a cool morning to full-blown toastiness when the temperature drops. This makes the Indian Motorcycle Heated Handlebar Grips a strong fit for riders who want precise comfort rather than just a few broad levels. The grooved rubber surface keeps your hands planted even in damp conditions, and installation is straightforward since they swap directly onto your existing handlebars.

These grips install in place of standard grips, so you can swap them onto your bike without buying extra adapters or brackets. The grooved rubber surface holds heating elements inside, meaning the warmth comes through a texture that still gives you a secure hold even in wet weather. With 10 heat settings to choose from, you can dial in exactly the level of warmth you need for that day’s ride, whether it’s a chilly morning or a cold evening commute.

These grips warm up in 10 seconds, so you feel heat almost as soon as you turn them on. At half a pound they add very little weight to your bars, which helps keep the bike feeling light. The five heat settings range from 50°C to 85°C, letting you pick your preferred level. The switch and cover are rated IP67, meaning they work even if submerged, so wet weather riding is less of a worry.

These grips fit 0.86-inch diameter 12V handlebars, so they are not for thicker bars. The pads are fully waterproof, but the cable to the battery is not, so you need to protect that connection. The KEMIMOTO grips are lighter than the Oxford Heaterz Premium Adventure at 1.3 pounds, which riders who want less weight may prefer.

The OXWIND ATV Heated Grips with Thumb Warmer pair a 22mm handlebar fit with a dedicated thumb heating sheet, so your whole hand stays warm on cold rides. Three heat settings let you dial in low, medium, or high warmth without complicated controls. This kit suits ATV owners who want simple, functional grip heat and a built-in thumb warmer. The 0.6-pound weight keeps installation light, and the 12V compatibility matches most four-wheelers straight from the battery.

The OXWIND is lighter and more compact than the Oxford Heaterz Premium Adventure, which weighs 1.3 pounds and has a different form factor. If you ride an ATV where the thumb warmer matters more than additional features, this kit delivers focused value for that specific use.

The honeycomb anti-skid particle design and silicone construction on these OXWIND grips mean your hands stay planted even when the trail gets rough or wet. That texture is the standout feature here, it’s not just about warmth; it’s about control when you’re wrestling the bars through loose dirt or mud. With 5+1 temperature settings, you can dial in exactly the heat level you need without fumbling, making cold-weather rides far more manageable. These grips are a natural fit for motocross and off-road riders who prioritize traction over extra frills.

These grips are built specifically for 7/8 inch handlebars, so if your bike uses a larger diameter bar, you’ll need to look elsewhere. For someone who values a secure, slip-resistant hold above all else and rides a standard 7/8-inch bar, these grips deliver exactly what they promise.