10 Best Motorcycle Phone Mounts With Charger in 2026

The mount requires a 12V–24V electrical system, so it won’t work on bikes with lower voltage without a converter. The anti-theft screws need the included wrench to tighten, which adds security but means you’ll need that tool if you want to remove the mount often. Compared to the SP CONNECT Moto Bundle II, the BRCOVAN grips the phone directly rather than using a phone case, which can be convenient if you switch phones or prefer not to keep a case on your device.

The Anti-Vibration Module reduces vibrations by up to 60%, which helps protect your phone from the shaking that can occur on a motorcycle. That elastomer inlay is the core of the vibration reduction, making this bundle a focused choice for riders who want to minimize wear on their device. The system works by clicking the included case into the Moto Mount Pro with a secure lock, and the MagSafe compatibility lets you attach the phone quickly when you’re in a hurry. For anyone who rides regularly and wants peace of mind that their device isn’t taking a beating, this is the setup that delivers on that promise without extra complexity.

The trade-off is that you’re buying into an ecosystem. The included case is part of the secure mount system, and the bundle does not include a built-in charger, so you’ll need to run a separate charging cable or rely on your phone’s battery for shorter trips. But if your priority is protecting your phone from vibration damage and you prefer a slim, magnetic-ready mount that stays put, the SP CONNECT bundle earns its place as the anti-vibration specialist. It’s a focused tool for a specific job, and it does that job exceptionally well.

The anti-theft security screw and snap-on cover prevent anyone from simply twisting the knob and removing the mount while your bike is parked, so you can leave it unattended in public spots without worry. It also includes a 15W wireless charger and a 36W USB-C port, letting you charge your phone and a second device at the same time. The built-in vibration dampener absorbs high-frequency handlebar vibrations, which helps protect your phone’s camera on rough roads, and the half-enclosure design keeps the lens clear for recording your ride. If security and dual-device charging are your priorities, this mount delivers.

Once the anti-theft cover is snapped on, you can still loosen the knob to tilt the phone, but you cannot remove the mount without a tool. That works fine for daily commutes, but if you frequently swap mounts between bikes or need quick removal, another mount without that locking cover might be easier to detach. Riders who prioritize keeping their mount secure when parked over quick-release convenience will find this a smart, affordable option.

The included bar clamp fits 1-1/4″, 1-3/8″, and 1-1/2″ handlebars, with bushings included to cover those sizes. That range covers many aftermarket and custom round stock motorcycle bars, so it works on setups where some other mounts might not fit. The vibration-dampening cradle and Qi wireless charging at up to 15W mean you can keep a phone secure and powered while riding, even on bikes with larger-diameter bars.

Most motorcycle USB ports can’t deliver the 3A output the Tackform Adventure mount needs for reliable wireless charging, so the included SAE hardwire cable is the practical way to power it. You get both a USB cable and that hardwire kit in the box, letting you choose the connection that works for your bike. The bar clamp fits 1-1/4″, 1-3/8″, and 1-1/2″ handlebars, which covers a wide range of aftermarket and custom round stock bars.

The IP67 waterproof rating means you can ride through a downpour without worrying about your phone or the charger shorting out. That’s the core reason this mount appeals to wet-weather riders. It also packs a 15W Qi wireless charger and a separate USB-C port, so you can juice up a phone and another item, like a camera or MP3 player, at the same time. The aluminum ball base is described as keeping the mount stable and secure even on bumpy roads, and the transparent cover stays responsive to touch, so you can navigate or change music without stopping.

This mount doesn’t include a vibration dampener, which matters if your handlebars transmit a lot of buzz at highway speeds. For comparison, the BRCOVAN model lists a vibration dampener in its features. The iMESTOU gets power by wiring to a 12/24V motorcycle or by plugging into an external USB A port from a handlebar charger or power bank, so you’ll need one of those sources to use it.

A built-in removable sunshade is the standout feature here, it cuts glare so you can read navigation in bright sun and keeps light rain off the screen, something most mounts ignore. The GIYOKAJU also charges three devices at once: a 15W wireless charger plus PD/USB-C and USB ports, so you can juice your phone and other gadgets on a long ride. The double socket arms with dual 1-inch balls let you adjust the phone to any viewing angle, and the anti-theft screw with its special wrench means no one walks off with your mount at a gas stop.

Weight is the main consideration here. At 1.3 pounds, this is a beefier setup than lighter options like the Kewig (0.6 pounds), so it’s better suited for cruisers and touring bikes than for sportbikes where every ounce matters. Also note that the anti-theft design locks the mount to the handlebar, not the phone itself, so you still need to pocket your phone when you park. If you ride in sunny climates or face sudden showers, the sunshade makes this a practical pick over mounts without it, like the BRCOVAN.

The through-hole design lets you keep your existing mirror in place while mounting the phone directly to the mirror bolt. That’s a smart solution if you don’t want to clutter your handlebars or lose your rear view. Vibration dampening is built into the cradle, so your phone’s camera stabilization system gets a layer of protection from the bike’s high-frequency shakes. Wireless charging works with 15W, 10W, 7.5W, and 5W standards, meaning it can top up most modern phones without fumbling for cables. This mount suits riders who already have a mirror bolt available and want a clean, low-profile setup that keeps the phone steady and charged.

Installation depends on having a compatible mirror bolt (M10 or 3/8″), so bikes without that setup will need an adapter or a different mounting approach. Power delivery is straightforward if you hardwire it to the battery with the included SAE cable, but relying on USB means your bike’s port must supply 3A output, which many motorcycle USB ports don’t.

A 15W wireless charger and a separate 20W USB-C port let you power up a phone and another gadget like a camera or GPS at the same time. All that comes from a mount that secures directly into your motorcycle’s fork stem. That stem-based design is the key here: instead of clamping onto handlebars, it fits into the cylindrical bore inside the fork tube, which means a cleaner look and zero handlebar clutter. It works with fork holes between 0.47 and 1 inch in diameter, so it’s a natural fit for many Kawasaki, Ducati, Honda, and BMW models. The auto-clamping arms snap open and closed with one hand, making it easy to grab your phone when you hop off the bike.

This mount only works if your bike has an accessible fork stem opening, no stem hole, no install. The double 1-inch RAM balls provide 720° of rotation, so you can dial in any viewing angle, but the design prioritizes a clean fork-stem fit over handlebar clamping. Compared to the BRCOVAN mount, which fits handlebars and includes a vibration dampener, the iMESTOU wins on tidy integration and the ability to charge two devices at once, but it demands a specific installation path. For riders whose bike already has the right stem opening and who want a neat, dual-device charging setup, this is a purpose-built choice.

A 30W USB-C port means this mount can charge a modern phone as fast as a wall adapter, which matters when you rely on GPS and music on long rides. The 1-second quick-release clamp lets you pop the phone in or out without fumbling, and the included rain cover and anti-slip pads add protection in messy weather. This mount works best for riders who want wired charging speed and don’t mind plugging in a cable each time.

The dual-USB charger won’t work with 90-volt e-bike or e-scooter batteries, so it’s meant for standard 12V motorcycles. Your phone needs to be between 3.25 and 7 inches to fit, and you’ll plug in via the USB-C port rather than using a wireless pad. That covers the essentials for most riders.

A fully waterproof build and 15-watt inductive charging make this clamp a standout for riders who face rain or splashes. The adjustable arms handle nearly any phone model, and at just 0.2 pounds it won’t weigh down your handlebars. This mount is built for simplicity: clamp your phone, ride through a downpour, and arrive with a fully charged device, no cables or cases to fuss with. It suits riders who want a no-nonsense, weatherproof charging solution that works with their existing SPC+ setup.

If you already own SPC+ hardware and ride in wet conditions, this is a clean fit. For riders wanting extra charging options or anti-vibration protection, another pick may serve better.