10 Best Waterproof Motorcycle Gloves in 2026

A CE-certified EN 13594:2015 Level 1 KP rating means these gloves meet a recognized European safety standard for impact protection, with hard-shell knuckle guards and reinforced fingers that add real coverage on the handlebars. The four-layer build, fleece lining, 3M insulation, a waterproof layer, and an outer shell, traps warmth while keeping rain out, making them a practical pick for cold commutes and wet weekend rides. A two-finger touchscreen tip on the thumb and index lets you check navigation without pulling a glove off, and the built-in visor wiper clears droplets from your helmet shield mid-ride. This combination of certified protection, all-weather layering, and thoughtful details makes it the strongest all-rounder for riders who want one glove that does winter, rain, and safety duty without fuss.

These gloves are built for cold and wet conditions, so they are thicker and more substantial than a lightweight rain glove like the 100% Hydromatic, which skips insulation for a slimmer profile in milder weather. If your rides stay above freezing or you prioritize dexterity over warmth, the Hydromatic might suit you better. But for riders facing real cold and wet conditions, the IRON JIA’S delivers certified protection and reliable waterproofing that the uninsulated alternatives can’t match. It’s a straightforward, capable choice that covers the essentials without overcomplicating things.

The Gore-Tex membrane with Gore Grip technology is guaranteed to keep you dry, and the carbon fiber knuckle protector and Poron XRD palm padding add protection. These gloves suit riders who want reliable waterproofing and impact protection in a short-cuff design that works well for wet conditions.

The short cuff leaves wrists exposed, which may allow water to enter if your jacket sleeve does not overlap. Compared to the REV’IT! Stratos 3 GTX, which has a longer gauntlet, these KLIMs offer a shorter profile. They have no insulation, so they are better suited for warmer weather or with added liners. For riders who prioritize waterproofing and protection over cuff length, this is a focused choice.

A GORE-TEX membrane and 3M Thinsulate insulation mean these gloves keep your hands dry and warm through cold rain or long highway stretches in mixed weather. Riders who face everything from morning frost to afternoon downpours will appreciate the combination of weather sealing and protective coverage that makes these a true all-season companion.

At a full pound, these gloves are heavier than some touring gloves, which matters for riders who log long days and notice every ounce. The Thinsulate insulation is designed for cold conditions, so on a hot summer day you may find yourself reaching for something airier. But for anyone logging long miles through variable conditions, the Stratos 3 GTX delivers the waterproofing, warmth, and protection that make the extra bulk a fair exchange for all-weather confidence.

A CE-certified hard knuckle and reinforced palm mean these gloves deliver real safety for adventure touring without the bulk of a heavy winter gauntlet. The Drystar membrane keeps water out while letting moisture escape, so your hands stay dry through a sudden downpour or a long day of mixed conditions. That balance of certified protection and all-weather comfort makes them a smart pick for riders who want one glove that handles spring showers, autumn commutes, and everything in between.

There is no insulation layer in these gloves, so on a freezing morning they will not keep your fingers toasty. The suede palm panels add durability for gripping bars mile after mile. For the rider who values certified safety and reliable waterproofing over extreme cold protection, these are a well-rounded choice.

The 80 grams of PrimaLoft Silver Insulation Active in these gloves provides warmth while allowing excess heat and moisture to escape, which helps keep hands comfortable in cold conditions. The GORE-TEX membrane offers wet-weather performance, and the GORE GRIP feature is designed to improve sensitivity and feel on the handlebars. The stretch textile top hand and flex panels are meant to optimize comfort and fit, so riders can maintain a natural grip without fighting stiff material.

At 2.2 pounds, these gloves are heavier than the REV’IT! Stratos 3 GTX Gloves, which weigh 1.0 pounds. The extra weight comes from the insulation and GORE-TEX construction, which may be noticeable on long rides. The mid-cuff design allows wearing over or under the sleeve for flexibility, but it does not provide the same coverage as a longer gauntlet. Riders who need warmth and waterproofing over minimal weight and a long cuff will find these gloves suitable.

Two rechargeable batteries included with the gloves deliver up to six hours of cordless warmth, which means you can ride through a full tank of fuel without your hands going numb. The dual-zone heating warms both the back and the palm, a smart design because the back of the hand takes the wind while the palm grips the bars. This makes the KEMIMOTO a natural fit for cold-weather commuters and long-distance riders who want active heat rather than just insulation. The five-layer build, including a waterproof membrane and 250g thermal layer, locks that heat in while keeping rain and snow out. The touchscreen-compatible fingertips let you use your phone or GPS without peeling off a glove.

The KEMIMOTO heated motorcycle gloves include two 3000mAh rechargeable batteries, so you get cordless warmth for up to six hours on a lower setting, but you’ll need to keep track of charging between rides. Unlike the non-heated KLIM Adventure GTX Short Gloves, which rely on whatever insulation they have, the KEMIMOTO lets you dial in three heat levels to match the cold. For riders who regularly face freezing temperatures or long evening commutes, that active heating makes the extra battery management worthwhile.

A pair of winter motorcycle gloves that use genuine cowhide leather and 3M Thinsulate insulation means you get both classic durability and modern cold-weather performance. This combination makes them a natural fit for riders who want traditional materials with up-to-date protection and warmth, especially on chilly commutes or longer wet rides where staying dry matters as much as staying safe.

Leather, while tough and comfortable once broken in, needs more upkeep than synthetic gloves and can stiffen when soaked. Compared to the IRON JIA’S Winter Motorcycle Gloves, which carry a CE certification (EN 13594) for impact protection, the VXW gloves rely on their materials and construction rather than a formal safety rating. If you prioritize a classic feel and lifetime warranty over a certified safety label, these deliver strong value for cold-weather riding without breaking the bank.

The trade-off is warmth. But for spring, summer, and fall motocross sessions where rain is the main concern, the 100% Hydromatic gives you the dexterity and grip you need without turning your hands into clammy mitts.

The GORE-TEX + GORE GRIP technology means these gloves are guaranteed to keep your hands dry, which is the first thing you want from a touring glove that might see rain. The goat leather palm and fingers give a durable, tactile feel on the controls, while the CE Level 1 knuckle protector and 5mm XRD foam in the palm add real impact protection without turning your hands into clubs. This is a glove built for riders who spend long days in mixed weather, cool mornings, warm afternoons, and sudden showers. They want a short cuff that slips under a jacket sleeve without bunching up.

The short cuff design leaves your wrists more exposed than a gauntlet-style glove like the KLIM Adventure GTX Short Gloves, so if you ride in heavy rain or at highway speeds for hours, you might get some water creep up the sleeve. There is no thermal insulation in the construction, so this is a three-season glove rather than a deep-winter option. For the rider who values dexterity and a clean fit with a matching Latitude jacket, and who rides in conditions where a short cuff works, this is a thoughtfully engineered piece of gear.

A CE-certified (EN 13594) armored glove at a budget-friendly price means you get certified impact protection without paying for premium materials. The hard PVC shield on the back of the hand and abrasion-resistant microfiber palm guard against bumps and slides. The four-layer construction with a windproof shell and thermal insulation keeps your hands warm in winter conditions. Riders who want reliable protection and cold-weather comfort without spending a lot will find this glove fits the bill nicely.

The CE certification under EN 13594:2015 means these gloves meet a recognized safety standard for motorcycle riders, so you get certified protection without spending a fortune. The hard PVC shield on the back of the hand adds impact defense, though it does make the gloves stiffer than some soft-armor alternatives. The 4-layer construction, windproof shell, water-resistant membrane, thermal padding, and fleece lining, keeps hands warm and dry for everyday commuting and casual winter rides. For riders who want certified safety and waterproof warmth on a budget, these gloves deliver where it counts.